Wrist Strap and Dual Footwear Tester

The Wrist strap Cum Dual Footwear tester is a jig type arrangement to test the validity of ESD Wrist strap; Slippons and Shoes and Independent measurement is taken simultaneously wrist_strap_dual_footwear_testerof both right, left foot and wrist strap at the same time. Other Footwear testers can only measure two foot at a time, or the combined resistance of both foot. The wrist strap cum Dual Foot Tester reduces the testing time by half, and offers the operator a visual and audible measurement of Pass or fail of both foot and wrist strap before entering the EPA. Operation of Wrist Strap: Connect the wrist strap cord to the instrument with the strap on the wrist; press gently on the metal sensor of the instrument. The instrument comes on automatically when this is done. The operator can check whether the resistance of the wrist strap falls within the acceptable range (0.75 to 10 Meg ohms), This is indicated by green (pass) LED lighting up. Operation of foot wears: Simply stand on the two stainless steel footprints and push the press to test button. The instrument comes on automatically when this is done. The operator can check whether the resistance of the Foot wears falls within the acceptable range of 0.75 to 100 meg ohms, This is indicated by green (pass) LED lighting up.

Specifications:
Wrist Strap Range : 0.75 to 10 Meg Ohms
Foot Wear Range : 0.75 to 100 Meg ohms
Indications : Pass – GREEN LED
LOW & High fail – RED LED with Alarm
Test actuation : By gently pressing metal sensor plate
Accuracy : +/- 10%
Power supply : 9 Volt Rechargeable Battery
Low battery : Warning at 7.0 V
Dimensions : Instrument: 158x95x 5 mm
Foot plate: 360 x 460 mm
Weight : Instrument (300Gms)/Foot Plate (3.5Kgs)
Calibration : Recommended every 12 months
Warranty : 12 Months
Optional : Door Locking System